Changing The Text Arrangement Of A Character - Brother 884-T11 Operation Manual

SELECTING/EDITING/SAVING PATTERNS — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Moves the pattern in the direction of
the arrow on the key.
Touch this key to return the pattern
to its original angle.
Touch this key to close this screen.
2 Touch the keys to adjust the pattern to the
desired angle.
Each touch of a key rotates the pattern.
1 Shows the angle of the pattern after a key is
touched to change it.
• To return the pattern to its original angle,
touch .
3 If necessary, touch the arrow keys to adjust
the position of the pattern.
(For more details, refer to page 183.)
4 After making the desired changes, touch
.
The pattern editing screen appears again.
CAUTION
●
After changing the angle of the pattern,
check the icons for the embroidery
frames that can be used and use only
the indicated frames. If a frame other
than those indicated are used, the
presser foot may hit the embroidery
frame and cause injuries.
186
● If
is used, the entire combined pattern can
be rotated. (For details, refer to "Rotating
the entire pattern" on page 205.)
● If the pattern is too large or the pattern is
too close to the edge of the embroidery
field, all of the rotating options may not
apply.
Changing the text
arrangement of a character
Characters can be arranged on a horizontal line, on
1
a slant or on an arc.
1 Touch
The screen shown below appears.
Memo
in the embroidering settings screen
.
Arranges the text on a straight line.
Arranges the text on the outside of a wide
curve.
Arranges the text on the inside of a wide
curve.
Arranges the text on a slanted line.