Exact Stop / Continuous-Path Control Mode: G9, G60, G64 - Siemens SINUMERIK 802D sl Programming And Operating Manual

Programming example
N10 G94 F310
...
N110 S200 M3
N120 G95 F15.5
Note: Write a new F word if you change G94 - G95.
Information
The G group with G94, G95 also contains the functions G96, G97 for the constant cutting
rate. These functions also influence the S word.
3.3.10

Exact stop / continuous-path control mode: G9, G60, G64

Functionality
G functions are provided for optimum adaptation to different requirements to set the travers-
ing behavior at the block borders and for block advancing.
Example: You would like to quickly position with the axes or you would like to machine path
contours over multiple blocks.
Programming
G60
G64
G9
G601
G602
Exact stop G60, G9
If the exact stop function (G60 or G9) is active, the velocity for reaching the exact end posi-
tion at the end of a block is decelerated to zero.
Another modal G group can be used here to set when the traversing movement of this block
is considered ended and the next block is started.
● G601 Exact stop window fine
● G602 Exact stop window coarse
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Block advance takes place when all axes have reached the "Exact stop window fine"
(value in the machine data).
Block advance takes place when all axes have reached the "Exact stop window coarse"
(value in the machine data).
;Feedrate in mm/min
;Spindle rotation
;Feedrate in mm/revolution
; Exact stop, modal
; Continuous-path mode
; Exact stop, non-modal
;Exact stop window fine
;Exact stop window coarse
Programming
3.3 Axis movements
3-41