Table 4-2 Additional Specified Values - Siemens SINUMERIK 802D sl Programming And Operating Manual

Parameter
F_KS
Example for oblique plunge-cutting
Machining of a shoulder in Z to the finished dimension 50 mm and of a seat in X to the finish-
ing diameter 200mm using CYCLE413; the sparking-out time is 5 s.
Table 4-6
A_SR=0.2 mm
A_SL=0.1 mm
A_FSL=0.03mm
N10 T1 D1 M7
N20 S1=2000 M1=3
N30 S2=1100 M2=4
N40 CYCLE413 (1, 200, 50, , 3, 5, 0.2,
0.1, 0.03, 60, 40, 30, 5, 0, 1, 600)
N50 M30
Sequence of operations
The sequence for positioning to the machining position is: X axis first, then the Z axis, or vice
versa, depending on the park position of the wheel in X.
The starting positions in X and Z are determined as follows:
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Data type Meaning
real Feedrate for air grinding [mm/min]
Additional specified values:
4.8 Oblique plunge-cutting – CYCLE413
Roughing allowance
Finishing allowance
Fine-finishing allowance
; Determine technology values, coolant ON
; Turn on wheel speed
; Turn on workpiece speed
; Cycle call
;End of program
Cycles
4-25