Siemens SINUMERIK 802D sl Programming And Operating Manual page 187

Menu tree
Figure 5-3
Softkeys
An explanation on the vertical softkeys is found in the MDA Section.
This function is used to determine the dresser positions in the machine for dressers that are
used by means of the geometry axes.
This function is used to detect the workpiece position in the machine with respect to the par-
ticular axis.
This function is used to shape a "raw" grinding wheel without generating an NC program.
This function is used to set the measuring position of the probe. The measuring position is
set up for each particular workpiece
The input screen shown below is intended to set the retraction plane, the safety clearance
and the direction of rotation of the spindle for automatically generated part programs in the
MDA mode. Furthermore, the values for the JOG feedrate and the variable size of incre-
ments can be set.
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
JOG menu tree (grinding)
Operating areas and operating modes
5.2 Machine operating area
5-5