Operating Areas - Siemens SINUMERIK 802D sl Programming And Operating Manual

Software interface

2.3 Operating areas

2.3 Operating areas
The functions of the control system can be carried out in the following operating areas:
To switch the operating area, press the relevant key (hard key) on the CNC full keyboard.
Protection levels
The SINUMERIK 802D sl provides a concept of protection levels for enabling data areas.
The control system is equipped with default passwords for protection levels 1 to 3.
Protection level 1
Protection level 2
Protection level 3
These control the various access rigths.
In the menus listed below the input and modification of data depends on the protection level
set:
● Tool offsets
● Zero offsets
● Setting data
● RS232 settings
● Program creation / program correction
2-4
Item Machine operation
Offset/parameters Entering the compensation values and setting
data
Program Creation of part programs
Program Manager Part program directory
System Diagnostics, commissioning
Alarm Alarm and message lists
Experts password
Manufacturer password
User password
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Grinding