Siemens SINUMERIK 802D sl Programming And Operating Manual page 209

Use the <Softkey color> and <Window color> softkeys to specify user-defined color settings.
The displayed color consists of the components red, green and blue.
The "Change color" window displays the values currently set in the input fields. The desired
color can be produced by changing these values. In addition, the brightness can be
changed.
The next mixing ratio is displayed temporarily upon completion of an input. Use the cursor
keys to switch between the input fields.
<OK> applies the settings and closes the dialog box. Selecting the <Abort> softkey will
closes the dialog box without applying your changes.
Use this function to change the colors of the tip and softkey area.
Figure 5-23
Use this softkey to change the color of the border of dialog boxes.
The <Active window> softkey function will assign your settings to the focus window, and the
<Inactive window> function to the non-active window.
Figure 5-24
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Edit softkey color.
Edit frame color.
Operating areas and operating modes
5.5 System operating area
5-27