Define
6.8 Arithmetic parameter R
6.8
Arithmetic parameter R
Functionality
In the R parameter start screen, any R parameters that exist within the control system are
listed. These can be changed as necessary.
Figure 6-20
Operating sequence
These can be found on the Offset parameters operating area.
Select the <R parameters> softkey to access the input area. Place the cursor bar on the in-
put field to be modified and enter the values.
Either press the <Input> key or move the cursor to confirm the entry.
Searching for R parameters
6-22
R parameters
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Grinding