Siemens SINUMERIK 802D sl Programming And Operating Manual page 285

A dialog box is displayed from which various search criteria can be selected. The <Abso-
lute/symbol. address> softkey can be used to search for a certain operand matching this cri-
terion in both PLC windows. When searching, uppercase and lowercase letters are ignored.
Selection in the upper toggle field:
● Search for absolute and symbolic operands
● Go to network number
● Find SBR command
Further search criteria:
● Search direction down (from the current cursor position)
● Whole program block (from the beginning)
● In one program block
● Over all program blocks
You can search for the operands and constants as whole words (identifiers).
Depending on the display settings, you can search for symbolic or absolute operands.
The <OK> softkey starts the search. The found search element is highlighted by the focus. If
nothing is found, an appropriate error message will appear in the notes line.
Use the <Abort> softkey to quit the dialog box. no search is carried out.
Figure 10-11 Search for symbolic operands
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
PLC diagnosis represented as a ladder diagram
10.2 Operating options
10-9