Siemens SINUMERIK 802D sl Programming And Operating Manual page 222

Operating areas and operating modes
5.5 System operating area
Using the PLC, you may select part programs and run them via the PLC. To this end, the
PLC user program writes a program number to the PLC interface, which is then converted to
a program name using a reference list. It is possible to manage max. 255 programs.
Figure 5-41
This dialog displays all files of the MPF directory and their assignment in the reference list
(PLCPROG.LST) in the form of a list. You can use the TAB key to switch between the two
columns. The Copy, Insert and Delete softkey functions are displayed with reference to a
specific context. If the cursor is placed on the left-hand side, only the Copy function is avail-
able. On the right-hand side, the Insert and Delete functions are provided to modify the ref-
erence list.
... writes the selected file name to the clipboard
... pastes the file name at the current cursor position
... deletes the selected file name from the assignment list
Structure of the reference list (file PLCPROG.LST)
It is divided into 3 areas:
Number
1 to 100
101 to 200
201 to 255
The notation is carried out for each program by lines. Two columns are intended per line,
which must be separated from each other by TAB, space or the "|" character. In the first col-
umn, the PLC reference number must be specified, and in the second column, the file name.
Example: 1 | Welle.mpf
2 | Kegel.mpf
5-40
PLC program list
range
User area
Machine manufacturer
Siemens
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Protection level
User
Machine manufacturer
Siemens
Grinding