Siemens SINUMERIK 802D sl Programming And Operating Manual page 184

Operating areas and operating modes
5.1 Offset Parameters operating area
Softkeys
Clearing the calculated dresser data.
Use this softkey to delete the tool.
Opens a lower-level menu bar offering all functions required to create and display further
tolol data.
This function is used to enter - guided by the menu - the nomiinal dimensions and monitoring
data of the grinding wheel.
This function is used the enter the wheel geometry for the wheel type selected.
This function is used the enter the dressing technology for dressing the wheel type selected.
This function is used to enter/verify the dresser data of the first dresser.
For dressers 2 and 3, it is selected through the respective softkeys.
This function is used to enter/verify all tool data (D1 through D9).
Use this function to copy an already existing tool.
Use this function to search for a tool by its number.
Use this softkey to create tool compensation data for a new tool.
This function is used to list and, if necessary, modify any R parameters that exist in the con-
trol system.
Input of the setting data.
5-2
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Grinding