Siemens SINUMERIK 802D sl Programming And Operating Manual page 191

Use the <PageUp> or <PageDown> keys to display additional G functions. Selecting the
softkey repeatedly will close the window.
This window displays the auxiliary and M functions currently active. Selecting the softkey re-
peatedly will close the window.
All the G functions are displayed.
Use this softkey to display the "Axis feedrate" window.
Pressing the softkey repeatedly will close the window.
Use this function to delete blocks from the program window.
Enter a name in the input field with which you wish the MDA program to be saved in the pro-
gram directory. Alternatively, you may select an existing program from the list.
Use the TAB key to change between input field and program list.
Figure 5-6
The actual values for the MDA mode are displayed depending on the selected coordinate
system. Use this softkey to switch between the two coordinate systems.
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Save MDA program
Operating areas and operating modes
5.2 Machine operating area
5-9