Siemens SINUMERIK 802D sl Programming And Operating Manual page 206

Operating areas and operating modes
5.5 System operating area
Figure 5-18
Axis-specific machine data
Open the "Axis-specific machine data" window. The softkey bar will be supplemented with
the softkeys <Axis +> and <Axis >.
Figure 5-19
The data of axis 1 are displayed.
Use <Axis +> or <Axis > to switch to the machine data area of the next or previous axis.
Find
Type the number or the name (or a part of the name) of the machine data you are looking for
and press <OK>.
The cursor will jump to the data searched.
5-24
The "Machine data" start screen
Axis-specific machine data
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Grinding