Siemens SINUMERIK 802D sl Programming And Operating Manual page 198

Operating areas and operating modes
5.3 Program Manager operating area
Selecting this softkey provides the functions required to read out / read in files via the RS232
interface and the function "Program execution from external". When the function is selected,
the directories of the CF card are displayed.
Use this softkey to select the program on which the cursor is placed for execution. If the CF
card is selected, the program is executed by the NC as an external program. This program
must not contain any program calls of part programs which are not stored in the directory of
the NC.
This softkey is needed in connection with the work in the network. For more information,
please refer to the "Network operation" section.
The functions required for reading out/reading in files are provided via the RS232 interface.
Use this function to transmit files from the clipboard to a PC connected to the RS232.
Load files via the RS232 interface.
For the settings of the interface, please refer to the System operating area. The part pro-
grams must be transmitted using the text format.
Error log
5-16
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Grinding