Siemens SINUMERIK 802D sl Programming And Operating Manual page 207

Use this softkey to continue searching for the next match.
This function provides various display filters for the active machine data group. Further soft-
keys are provided:
● <Expert>: Use this softkey to select all data groups of the epert mode for display.
● <Filter active>: Use this softkey to activate all data groups selected. After you have quit
● <Select all>: Use this softkey to select all data groups of the Expert mode for display.
● <Deselect all>: Selecting this softkey deselects all data groups.
Figure 5-20
Channel-specific machine data
Open the "Channel-specific machine data" window. Use the PageUp/PageDown keys to
browse forward/backward.
SINAMICS drive machine data
Open the "Drive machine data" dialog box.
The first dialog box displays the current configuration, as well as the states of the control,
power supply and drive units.
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
the window, you will only see the selected data on the machine data display.
Display filter
Operating areas and operating modes
5.5 System operating area
5-25