Siemens SINUMERIK 802D sl Programming And Operating Manual page 247

A limitation of the spindle speed in the "Max." (G26) / "Min." (G25) fields can only be per-
formed within the limit values defined in the machine data.
Limitation using G96
Programmable upper speed limitation (LIMS) at constant cutting rate (G96).
Dry run feed (DRY)
The feedrate which can be entered here will be used instead of the programmed feedrate in
the AUTOMATIC mode if the "Dry run feed" function is selected.
Starting angle for thread (SF)
For thread cutting, a start position for the spindle is displayed as the start angle. A multiple
thread can be cut by changing the angle when the thread cutting operation is repeated.
Place the cursor bar on the input field to be modified and enter the value.
Either press the Input key or move the cursor to confirm.
Softkeys
The working area limitation is active with geometry and additional axes. If you want to use a
working area limitation, its values can be entered in this dialog box. Selecting the <Set ac-
tive> softkey enables/disables the values for the axis highlighted by the cursor.
Figure 6-17
Times Counters
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Working area limitation
Define
6.7 Program setting data
6-19