Siemens SINUMERIK 802D sl Programming And Operating Manual page 268

Network operation
8.1 Network operation
Figure 8-7
Place the cursor on an unused drive designator and use the TAB key to switch to the Path
input field. Specify the IP address of the server and the the share name.
Example: \\192.4.5.23\TEST\
The <Connect> softkey assigns a drive designator to the server connection.
Disconnecting network drives
Use the <Disconnect> function to cancel an existing network connection.
Place the cursor on the appropriate drive designator and press the <Disconnect> softkey.
The appropriate drive is disconnected from the network.
8-8
Connecting network drives
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Grinding