Assigning Handwheels - Siemens SINUMERIK 802D sl Programming And Operating Manual

6.9

Assigning handwheels

Operating sequence
In JOG mode.
select the <Handwheel> softkey. The "Handwheel" window appears on the screen.
After the window has been opened, all axis identifiers are displayed in the "Axis" column,
which simultaneously appear in the softkey bar.
Select the desired handwheel using the cursor. Thereafter, press the relevant axis softkey
for the desired axis for assignment or deselection
The ☑ symbol appears in the window.
Figure 6-21
Use the <MCS> softkey to select the axes from the machine or workpiece coordinate system
for handwheel assignment. The current setting is displayed in the window.
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Handwheel menu screen
Define
6.9 Assigning handwheels
6-23