User Management - Siemens SINUMERIK 802D sl Programming And Operating Manual

Figure 8-2
The RCS network requires the ports 80 and 1597 for communication.
To change the port status, select the relevant port using the cursor. Pressing the Input key
changes the port status.
Open ports are shown with the checkbox enabled.
8.1.2

User management

Press the <Service display> <Service control system> softkeys in the system operating area.
Select the <Service network><authorization> softkey to obtain access to the user account
input screen.
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Firewall configuration
Network operation
8.1 Network operation
8-3