Operating areas and operating modes
5.1
Offset Parameters operating area
Functionality
In the offset parameters operating area, the parameters required for machine operation are
placed.
Operating sequences
This function opens the "Tool offset data" window which contains a list of the tools created.
Use the cursor keys and the <Page Up>/<Page Down> keys to navigate in this list.
Figure 5-1
To input the offsets, position the cursor bar on the tool to be changed and press the <tool
data> key.
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Tool list
5
5-1