5.6
Alarms operating area
Operating sequence
The alarm window is opened. You can sort the NC alarms using softkeys; PLC alarms will
not be sorted.
Figure 5-45
Softkeys
Use this softkey to display all alarms sorted by their priorities. The highest priority alarm is at
the beginning of the list.
Use this softkey to display the alarms sorted by the time of their occurrence. The most recent
alarm stands at the beginning of the list.
Use this softkey to display the alarms sorted by the time of their occurrence. The oldest
alarm stands at the beginning of the list.
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Alarm display window
Operating areas and operating modes
5.6 Alarms operating area
5-45