Mda Mode (Manual Input) - Siemens SINUMERIK 802D sl Programming And Operating Manual

5.2.2

MDA mode (manual input)

Functionality
In the MDA mode, you can create or execute a part program.
Caution
The Manual mode is subject to the same safety interlocks as the fully automatic mode.
Furthermore, the same prerequisites are required as in the fully automatic mode.
Operating sequences
Select MDA mode through the machine control panel.
Figure 5-5
Enter one or several blocks using the keyboard.
Press <NC START> to start machining. During machining, editing of the blocks is no longer
possible.
After machining, the contents are preserved so that the machining can be repeated by press-
ing <NC START> once more.
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
MDA start screen
Operating areas and operating modes
5.2 Machine operating area
5-7