Creating / Reading In / Reading Out A Start-Up Archive - Siemens SINUMERIK 802D sl Programming And Operating Manual

9.2

Creating / reading in / reading out a start-up archive

Note
/BA/ SINUMERIK 802D sl "Instruction Manual", Section "Data backup and machine series
start-up"
Operating sequence
Select the <Commissioning files> softkey which is to be found in the "System" operating
area.
Creating a start-up archive
A start-up archive can be created either with all components or with some selected compo-
nents.
To create an archive with selected components, the following operator actions are required:
Press <802D data>. Select the line Commissioning archive (NC/PLC) using the arrow keys.
Press ENTER to open the directory and select the desired lines using the cursor keys.
Press the <Copy> softkey. The files are copied to the clipboard.
Figure 9-2
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
Copy entire start-up backup
9.2 Creating / reading in / reading out a start-up archive
Data Backup
9-3