Description; Operating And Display Elements - Siemens SINUMERIK 802D sl Programming And Operating Manual

Description

1.1

Operating and display elements

Operator Controls
The defined functions are called up via the horizontal and vertical softkeys. For a description,
please refer to this manual:
Figure 1-1
Display of the LEDs on the operator panel CNC (PCU)
The following LEDs are installed on the operator panel CNC.
The individual LEDs and their functions are described in the table below.
Grinding
Programming and Operating manual, 06/2006, 6FC5398-4CP10-0BA0
CNC operator panel
1
1-1