Operating Areas And Protection Levels - Siemens sinumerik 802d sl Operation And Programming Manual

Introduction
1.2

Operating areas and protection levels

Use this softkey to cancel the input; the window is closed.
Selecting this softkey will complete your input and start the calculation.
Selecting this softkey will complete your input and accept the values you have entered.
1.2 Operating areas and protection levels
The functions of the control system can be carried out in the following operating areas:
Position
Offset/Parameters
Program
Program Manager
System
Alarm
To switch the operating area, use the relevant key (hard key).
Protection levels
The SINUMERIK 802D sl provides a concept of protection levels for enabling data areas.
The control system is delivered with default passwords for the protection levels 1 to 3.
S Protection level 1
S Protection level 2
S Protection level 3
These cotnrol the individual access authorizations.
1-14
Machine operation
Input of offset values and setting data
Creation of part programs
Part program directory
Diagnosis, start-up
Alarm and message lists
Expert password
Manufacturer password
User password
SINUMERIK 802D sl Operation and Programming Nibbling (BP-N), 06/2006 Edition
6FC5 398-3CP10-0BA0