Assigning A Wlan Group To An Ap - Ruckus Wireless ZoneDirector 1100 User Manual

Managing a Wireless Local Area Network
Working with WLAN Groups
Figure 83.

Assigning a WLAN Group to an AP

1. Go to Configure > Access Points.
2. In the list of access points, find the MAC address of the AP that you want to assign to a
WLAN group, and then click Edit.
3. In WLAN Group, click Override Group Config and select the WLAN group to which you
want to assign the AP. Each AP (or radio, on dual radio APs) can only be a member of a
single WLAN group.
4. Click OK to save your changes.
WLAN group
130