Managing User Access
Enabling Automatic User Activation with Zero-IT
•
HKLM\SYSTEM\CurrentControlSet\Control\Class\{4D36E972-E325-11CE-
BFC1-08002BE10318} > Allow user to define value and create subkey
•
HKLM\SOFTWARE\Microsoft\WZCSVC\Parameters\Interfaces > Add total rights
permission
Additionally, you must enable permission to modify WZC (Windows Zero Configuration) for the
users/groups by creating a new security template and applying the template to the account
using MMC (Microsoft Management Console).
For clients running Mac OS X, the user must be logged in as an administrator for Zero-IT
configuration to work.
Self-Provisioning Clients with Zero-IT
To self-provision a computer to the wireless LAN, use the following procedure:
1. Connect the computer to the wired LAN using an Ethernet cable.
2. Open a Web browser and enter the Activation URL in the navigation bar (http://
<zonedirector's_IP_address>/activate). A WLAN Connection Activation Web
page appears.
3. Enter User Name and Password, and click OK. If the computer is running a supported
operating system, an automated script will launch.
Figure 124. Zero-IT automatic activation
4. Run the prov.exe script to automatically configure this computer's wireless settings for
secure access to the WLAN.
5. If you are not running a supported operating system, you can manually configure wireless
settings by clicking the link at the bottom of the page (see
Not Support Zero-IT"
on
page
207).
"Provisioning Clients that Do
204