Ruckus Wireless ZoneDirector 1100 User Manual page 154

Managing a Wireless Local Area Network
Working with Hotspot Services
• Create a Hotspot 2.0 WLAN
Create a Service Provider Profile
To create a Service Provider Profile
1. Go to Configure > Hotspot 2.0 Services.
2. Click Create New under Service Provider Profiles.
3. Configure the settings in
Table 22. Hotspot 2.0 Service Provider profile configuration
Option
Name
Description
NAI Realm List
Domain Name List
Roaming Consortium List
3GPP Cellular Network Information
4. Click OK to save your changes.
5. Continue to
Table 22 to create a Service Provider profile.
Create an Operator Profile.
Description
Enter a name for this Service Provider profile.
(Optional) Enter a description.
List of network access identifier (NAI) realms
corresponding to SSPs or other entities whose
networks or services are accessible via this AP.
Up to five NAI realm entries can be created. Each
NAI realm entry can contain up to four EAP
methods. Each EAP method can contain up to
four authentication types.
List of domain names of the entity operating the
access network. Up to five entries can be
created.
List of Organization Identifiers included in the
Roaming Consortium list, as defined in
IEEE802.11u, dot11RoamingConsortiumTable.
Up to two Roaming Consortium entries can be
created.
Contains cellular information such as network
advertisement information to assist a 3GPP
station in selecting an AP for 3GPP network
access, as defined in Annex A of 3GPP TS 24.234
v8.1.0. Up to eight entries can be created.
142