Ruckus Wireless ZoneDirector 1100 User Manual page 35

Introducing Ruckus Wireless ZoneDirector
Accessing ZoneDirector's Command Line Interface
Figure 11. Configure a terminal client
4. Click OK or Open to connect (depending on your terminal client).
5. At the Please Login prompt, enter the admin login name (default: admin) and password
(default: admin).
You are now logged into ZoneDirector with limited privileges. As a user with limited privileges,
you can view a history of previously executed commands and ping a device. If you want to run
more commands, you can switch to privileged mode by entering enable at the root prompt.
To view a list of commands that are available at the root level, enter help or ?.
For more information on using the CLI, see the Ruckus Wireless ZoneDirector Command Line
Interface Reference Guide, available from http://support.ruckuswireless.com/.
23