NOTE: If you have made any configuration changes, Ruckus Wireless recommends shutting
down ZoneDirector to ensure that all configuration changes are saved and remain after reboot.
Performing a Restart may cause ZoneDirector to lose configuration changes if you forgot to
click Apply after making changes and navigate away from a configuration page, for example.
To restart ZoneDirector (and all currently active APs)
1. Go to Administer > Restart.
2. When the Restart / Shutdown features appear, click Restart.
You will be automatically logged out of ZoneDirector. After a minute, when the Status LED
is steadily lit, you can log back into ZoneDirector.
Figure 187. The Restart/Shutdown page
Troubleshooting
Restarting ZoneDirector
291