Figure 40.
Enabling the SNMPv3 agent
Enabling SNMP Trap Notifications
If you have an SNMP trap receiver on the network, you can configure ZoneDirector to send
SNMP trap notifications to the server. Enable this feature if you want to automatically receive
notifications for AP and client events that indicate possible network issues (see
tions That ZoneDirector Sends"
To enable SNMP trap notifications
1. In the Network Management section of the System page, scroll down to the bottom of the
page.
2. Under SNMP Trap, select the Enable SNMP Trap check box.
3. In SNMP Trap format, select either SNMPv2 or SNMPv3. You can select only one type of
trap receiver.
•
If you select SNMPv2, you only need to enter the IP addresses of up to four SNMP trap
receivers on your network.
•
If you select SNMPv3, enter up to four trap receiver IP addresses along with authenti-
cation method passphrase and privacy (encryption) settings.
4. Click Apply to save your changes.
on
page
60).
Configuring System Settings
Enabling Network Management Systems
"Trap Notifica-
59