Testing Authentication Settings - Ruckus Wireless ZoneDirector 1100 User Manual

Figure 77. Select TACACS+ for ZoneDirector administrator authentication

Testing Authentication Settings

The Test Authentication Settings feature allows you to query an AAA server for a known
authorized user, and return Groups associated with the user that can be used for configuring
Roles within ZoneDirector.
After you have configured one or more authentication servers in ZoneDirector, perform this
task to ensure that ZoneDirector can connect to the authentication server and retrieve the
groups/attributes that you have configured for each user account.
NOTE: If testing against a RADIUS server, this feature uses PAP or CHAP depending on the
RADIUS server configuration and the choice you made in
above. Make sure that either PAP or CHAP is enabled on the Remote Access Policy (assuming
Microsoft IAS as the RADIUS server) before continuing with testing authentication settings.
1. On the Configure > AAA Servers page, locate the Test Authentication Settings section.
2. Select the authentication server that you want to use from the Test Against drop-down
menu.
3. In User Name and Password, enter an Active Directory, LDAP or RADIUS user name and
password.
4. Click Test.
Configuring Security and Other Services
Testing Authentication Settings
"RADIUS / RADIUS Accounting"
109