Monitoring Generated Guest Passes; Configuring Guest Subnet Access - Ruckus Wireless ZoneDirector 1100 User Manual

5. Using a spreadsheet application, open the CSV file and edit the guest pass profile by filling
out the following columns:
• #Guest Name: Type the name of the guest user (one name per row).
• Remarks: (Optional) Type any note or remarks about the guest pass.
• Key: Type a guest pass key consisting of 1-16 alphanumeric characters. If you want
ZoneDirector to generate the guest pass key automatically, leave this column blank.
6. Go back to the Guest Information page, and then complete steps 6 to 10 in
and Printing Multiple Guest Passes at Once"
generate multiple guest passes.

Monitoring Generated Guest Passes

Once you have generated a pass for a guest, you can monitor and, if necessary, remove it.
1. Go to Monitor > Generated Guest Passes.
2. View generated guest passes.
3. To remove a guest pass, select the check box for the guest pass.
4. Click the Delete button.
Figure 139. Viewing generated Guest Passes

Configuring Guest Subnet Access

By default, guest pass users are automatically blocked from the ZoneDirector subnet (format:
A.B.C.D/M) and the subnet of the AP to which the guest user is connected. If you want to
create additional rules that allow or restrict guest users from specific subnets, use the Guest
Access > Restricted Subnet Access section.
You can create up to 22 subnet access rules, which will be enforced both on the ZoneDirector
side (for tunneled/redirect traffic) and the AP side (for local-bridging traffic).
NOTE: All guests share this same subnet access policy.
To create a guest access rule for a subnet
1. Go to Configure > Guest Access.
Managing Guest Access
Working with Guest Passes
above to upload the guest pass profile and
"Generating
227