Reviewing Recent Network Events
You have two options for reviewing events in your network: [1] open a complete list of all events,
or [2] look at specific lists of events in each Monitor tab workspace, such as the WLANs
workspace "Events/Activities" table.
1. Open the ZoneDirector Dashboard and look at the Most Recent User Activities table and
Most Recent System Activities table for summaries of activity in the network.
2. Go to the Monitor tab.
3. Click any of the specific options, such as WLANs, Access Points, or Currently Active Clients.
4. Look for an All Events table that specifically focuses on the selected category.
5. Under the Monitor tab, click either the All Alarms button or the All Events/Activities button
to see a complete list, with all categories represented in chronological order. AP events
display the first 17 characters of an AP name, if AP names are used.
Clearing Recent Events/Activities
To review the current events and, if appropriate, clear all resolved events, follow these steps:
1. Go to Monitor > All Events/Activities.
2. When the All Events/Activities page appears, the Events/Activities table lists the unresolved
events, the most recent at the top.
3. Review the contents of this table. You can sort the list by severity level, date/time, user name
and activity type. Click the column header to sort, and click again to reverse the order
displayed.
4. You can click Clear All at the bottom of the table to resolve and clear all events in the view.
Reviewing Current User Activity
You can monitor current wireless users on a per-client basis by doing the following:
1. Go to Monitor > Currently Active Clients.
2. When the Currently Active Clients page appears, review the table for a general survey.
3. Click any client device MAC address link to monitor that client in more detail.
Additionally, you can perform a number of actions on individual clients from this page, including
blocking unauthorized clients, deleting clients from the table (which will allow them to attempt
to reconnect), testing throughput using SpeedFlex, and testing connectivity using Ping and
Traceroute.
To review blocked clients, go to Configure > Access Control > Blocked Clients.
Monitoring Your Wireless Network
Reviewing Recent Network Events
189