Modifying Model Specific Controls - Ruckus Wireless ZoneDirector 1100 User Manual

3. Click OK to save your changes.
To move an AP from the current AP group to another group
1. Click the check box next to any AP you want to move (to select all APs in the group, click
the check box at the top of the column).
2. Select the target AP group from the drop-down list, and click Move To. The AP disappears
from the current group list.
3. Click OK to save your changes.
Figure 100. Modify AP group membership

Modifying Model Specific Controls

The following settings can be applied to all APs of a particular model that are members of the
AP group:
• Max Clients: Set the maximum number of clients that can associate to the AP. Note that
different AP models have different maximum client limitations.
• Internal Heater: Enable internal heaters (specific AP models only).
NOTE: For the internal heater to be operational, ZoneFlex 7762 APs must be powered by the
supplied PoE injector and its associated power adapter or a standard 802.3at PSE. For the PoE
Out port to be operational, ZoneFlex 7762 APs must be powered by the supplied PoE injector
and its associated power adapter.
• PoE Out Ports: Enable PoE out ports (specific ZoneFlex AP models only).
Managing Access Points
Working with Access Point Groups
159