Ruckus Wireless ZoneDirector 1100 User Manual page 90

Configuring Security and Other Services
Controlling Device Permissions: Blocking and ACLs
L2/MAC Access Control
Using the Access Controls configuration options, you define Layer 2/MAC address ACLs, which
can then be applied to one or more WLANs (upon WLAN creation or edit). ACLs are either
allow-only or deny-only; that is, an ACL can be set up to allow only specified clients or to deny
only specified clients. MAC addresses that are in the deny list are blocked at the AP, not at
ZoneDirector.
To configure an L2/MAC ACL
1. Go to Configure > Access Control.
2. In L2/MAC Access Control, click Create New.
3. Type a Name for the ACL.
4. Type a Description of the ACL.
5. Select the Restriction mode as either allow or deny.
6. Type a MAC address in the MAC Address text box, and then click Create New to save the
address. The new MAC address that you added appears next to the Stations field. You can
enter up to 128 MAC addresses per ACL.
7. Click OK to save the L2/MAC based ACL.
You can create up to 32 L2/MAC ACL rules and each rule can contain up to 128 MAC addresses.
Figure 53. Configuring an L2/MAC access control list
78