Ruckus Wireless ZoneDirector 1100 User Manual page 74

Configuring System Settings
Enabling Network Management Systems
Table 16. Trap notifications
Trap Name
ruckusZDEventClientRoamOut
ruckusZDEventClientRoamIn
ruckusZDEventClientAuthFai
led
ruckusZDEventClientAuthori
zationFailed
ruckusZDEventAPcoldstart
ruckusZDEventAPwarmstart
ruckusZDEventAPclientValve
ruckusZDEventAPCPUvalve
ruckusZDEventAPMEMvalve
ruckusZDEventSmartRedundan
cyChangetoActive
ruckusZDEventSmartRedundan
cyActiveConnected
ruckusZDEventSmartRedundan
cyActiveDisconnected
ruckusZDEventSmartRedundan
cyStandbyConnected
ruckusZDEventSmartRedundan
cyStandbyDisconnected
Description
A client has roamed away from an AP. The
client's MAC address, AP's MAC address and
SSID are included.
A client has roamed in to an AP. The client's
MAC address, AP's MAC address and SSID
are included.
A client authentication attempt has failed.
The client's MAC address, AP's MAC
address, SSID and failure reason are
included.
A client authorization attempt to join an AP
has failed. The client's MAC address, AP's
MAC address and SSID are included.
An AP has been cold started.
An AP has been warm started.
Triggered when an AP's online client limit has
been exceeded.
An AP's CPU utilization has exceeded the set
value.
An AP's memory utilization has exceeded the
set value.
The standby Smart Redundancy
ZoneDirector has failed to detect its active
peer, system changed to active state.
The active Smart Redundancy ZoneDirector
has detected its peer and is in active/
connected state.
The active Smart Redundancy ZoneDirector
has not detected its peer and is in active/
disconnected state.
The standby ZoneDirector has detected its
peer and is in standby/connected state.
The standby ZoneDirector has not detected
its peer and is in standby/disconnected
state.
62