Monitoring Your Wireless Network
Reviewing Current Alarms
Reviewing Current Alarms
If an alarm condition is detected, ZoneDirector will record it in the events log, and if configured,
will send an email warning. To review the current alarms and clear all resolved alarm records,
follow these steps:
1. Go to Monitor > All Alarms.
2. When the All Alarms page appears, the Alarms table lists the unresolved alarms, the most
recent at the top.
Figure 115. The All Alarms page
3. Review the contents of this table. The Activities column is especially informative.
4. If a listed alarm condition has been resolved, click the now-active Clear link to the right.
You also have the option of clicking Clear All to resolve all alarms at one time.
188