Figure 31.
To view current DHCP clients, click the "click here" link
Setting the System Time
The internal clock in ZoneDirector is automatically synchronized with the clock on your
administration PC during the initial setup. You can use the Web interface to check the current
time on the internal clock, which shows up as a static notation in the Configure tab workspace.
If this notation is incorrect, you can re-synchronize the internal clock to your PC clock immedi-
ately by clicking the Sync Time with Your PC button.
A preferable option is to link your ZoneDirector to an NTP server (as detailed below), which
provides continual updating with the latest time.
1. Go to Configure > System.
2. In the System Time features you have the following options:
•
Refresh: Click this to update the ZoneDirector display (a static snapshot) from the
internal clock.
•
Synch Time with your PC Now: If needed, click this to update the internal clock with the
current time settings from your administration PC.
•
Use NTP... (Enabled by default): Clear this check box to disable this option, or enter the
DNS name or IP address of your preferred NTP server to use a different one.
•
Select time zone for your location: Choose your time zone from the drop-down menu.
Setting the proper time zone ensures that timestamps on log files are in the proper time
zone.
3. Click Apply to save the results of any resynchronization or NTP links.
Configuring System Settings
Setting the System Time
45