Ruckus Wireless ZoneDirector 1100 User Manual page 169

2. In the Access Point Groups section, locate the System Default access point group, and click
the Edit button on the same line. The Editing (System Default) form appears.
3. Modify any of the settings in
group, and click OK to save your changes.
Table 24. Access Point group settings
Setting
Name
Description
Channel Range Settings To limit the available channels for 2.4 GHz, 5 GHz Indoor and 5
Channelization
Channel
Tx Power
11n Only Mode
WLAN Group
Call Admission Control (Disabled by default). Enable Wi-Fi Multimedia Admission Control
IP Mode
Model Specific Control Use this section to configure max clients, LEDs and port settings
Group Settings
Table 24 that you want to apply to the System Default AP
Description
The System Default group name can not be changed (you can edit
this field when creating/editing any other AP group).
The System Default description can not be changed (you can edit
this field when creating/editing any other AP group).
GHz Outdoor channel selection, select Override System Default
and deselect any channels that you do not want the APs to use.
Select Auto, 20MHz or 40MHz channel width for either the 2.4 GHz
or 5 GHz radio.
Select Auto or manually assign a channel for the 2.4 GHz or 5 GHz
radio.
Allows you to manually set the transmit power on all 2.4 GHz or 5
GHz radios (default is Auto).
Force all 802.11n APs to accept only 802.11n compliant devices on
the 2.4 GHz or 5 GHz radio. If 11n only Mode is enabled, all older
802.11b/g devices will be denied access to the radio.
Specify which WLAN group this AP group belongs to.
(WMM-AC) to support Polycom/Spectralink VIEW certification.
See Advanced Options
information.
Set IPv4, IPv6 or dual-stack IPv4/IPv6 IP addressing mode.
for all APs of each specific model that are members of the group.
See Modifying Model Specific
The Group Settings section is used to move access points
between groups. See Modifying Access Point Group
Managing Access Points
Working with Access Point Groups
under Creating a WLAN
Controls.
for more
Membership.
157