Self-Provisioning Clients Without Ethernet Ports - Ruckus Wireless ZoneDirector 1100 User Manual

Figure 125. Corporate WLAN configuration
You have completed Zero-IT configuration for this user. Repeat this procedure to automatically
configure all additional users of your internal WLAN.

Self-Provisioning Clients without Ethernet Ports

Many mobile devices such as iPhone, iPad, Windows Phone and Android smartphones can also
use Zero-IT Activation. However, since these devices do not have Ethernet ports, the setup
required is somewhat more complicated.
First, you will need to create a separate provisioning WLAN with Hotspot service so that these
devices can be provisioned over the air rather than via Ethernet. Clients without Ethernet ports
will need to login to this Hotspot WLAN first before gaining access to the Zero-IT Activation
URL. Once logged in, they connect to the Activation URL to download the self-provisioning
tool. Running this tool provisions the device for access to any of the "real" WLANs for which
the user is authorized.
To enable Zero-IT activation over the air
1. Create a Hotspot service (see
details required are:
• Name: For example, "Zero-IT Activation")
• Login Page URL: For example, "https://<zonedirector IP address or host
name>/activate"
2. Go to Configure > WLANs. In the WLANs section, click Create New to create a new WLAN
(see Figure 126).
Enabling Automatic User Activation with Zero-IT
"Working with Hotspot Services"
Managing User Access
on page 138). The only
205