Ruckus Wireless ZoneDirector 1100 User Manual page 65

4. To verify that ZoneDirector can send alarm messages using the SMTP settings you config-
ured, click the Test button.
• If ZoneDirector is able to send the test message, the message Success! appears at
the bottom of the Email Notification page. Continue to
• If ZoneDirector is unable to send the test message, the message Failed! appears at
the bottom of the Email Notification page. Go back to
SMTP settings are correct.
5. Click Apply. The email notification settings you configured become active immediately.
Figure 36. The Alarm Settings page
NOTE: If the Test button is clicked, ZoneDirector will attempt to connect to the mail server for
10 seconds. If it is unable to connect to the mail server, it will stop trying and quit.
NOTE: When the alarm email is first enabled, the alarm recipient may receive a flood of alarm
notifications. This may cause the mail server to treat the email notifications as spam and to
temporarily block the account.
Configuring System Settings
Setting Up Email Alarm Notifications
Step 5.
Step 3., and then verify that the
53