•
An active ZoneDirector behind NAT will be unable to perform upgrades to the standby
ZoneDirector on the other side of the NAT device.
Installing ZoneDirector
Basic installation instructions are included in the Quick Start Guide that shipped with your
ZoneDirector. The steps are summarized below:
1. Connect and discover ZoneDirector using UPnP (Universal Plug and Play).
•
On Windows 7, you may need to Turn on network discovery in the Network and
Sharing Center > Advanced Sharing Settings.
2. Double-click the ZoneDirector icon when UPnP displays it, or
3. Point your Web browser to ZoneDirector's IP address (default: 192.168.0.2).
4. Run the Setup Wizard to create an internal and (optionally) a guest WLAN.
5. Distribute APs around your worksite, connect them to power and to your LAN.
6. Begin using your ZoneFlex network.
Figure 9.
Discover ZoneDirector using UPnP
Introducing Ruckus Wireless ZoneDirector
Installing ZoneDirector
21