Introducing Ruckus Wireless ZoneDirector
Accessing ZoneDirector's Command Line Interface
Figure 10.
Accessing ZoneDirector's Command Line Interface
In general, this User Guide provides instructions for managing ZoneDirector and your ZoneFlex
network using the ZoneDirector Web interface. You can also perform many management and
configuration tasks using the ZoneDirector Command Line Interface (CLI) by connecting
directly to the Console port or an Ethernet port.
To access the ZoneDirector CLI
1. Connect an admin PC to the ZoneDirector Console port or any of the LAN ports (using
either a DB-9 serial cable for the console port or an Ethernet cable for LAN ports).
2. Launch a terminal program, such as Hyperterminal, PuTTy, etc.
3. Enter the following connection settings:
•
Bits per second: 115200
•
Data bits: 8
•
Parity: None
•
Stop bits: 1
•
Flow control: None
ZoneDirector Setup Wizard
22