Configuring System Settings
Changing the System Log Settings
Changing the System Log Settings
ZoneDirector maintains an internal log of current events and alarms. This file has a fixed
capacity; at a certain level, ZoneDirector will start deleting the oldest entries to make room for
the newest. This log is volatile, and the contents will be deleted if ZoneDirector is powered
down. If you want a permanent record of all logging activities, you can set up your syslog server
to receive log contents from ZoneDirector, and then use the Web interface to direct all logging
to the syslog server—as detailed in this topic.
Reviewing the Current Log Contents
1. Go to Monitor > All Events/Activities.
2. Review the events and alarms listed below.
NOTE: Log entries are listed in reverse chronological order (with the latest logs at the top of
the list).
3. Click a column header to sort the contents by that category.
4. Click any column twice to switch chronological or alphanumeric sorting modes.
Figure 34.
Customizing the Current Log Settings
You can review and customize the log settings by following these steps:
The All Events/Activities page
50