Ruckus Wireless ZoneDirector 1100 User Manual page 31

Figure 8. Select the 006 DNS Servers check box, and then type your DNS server's IP
address in the Data entry section
Step 3: Register the ZoneDirector IP Addresses with a DNS Server
After you complete configuring the DHCP server with DNS related information, you need to
register the IP addresses of ZoneDirector devices on the network with your DNS server. The
procedure for this task depends on the DNS server software that you are using.
Information on configuring the built-in DNS server on Windows is available at 
http://support.microsoft.com/kb/814591.
NOTE: When your DNS server prompts you for the corresponding host name for each
ZoneDirector IP address, you MUST enter zonedirector. This is critical to ensuring that the
APs can resolve the ZoneDirector IP address.
After you register the ZoneDirector IP addresses with your DNS server, you have completed
this procedure. APs on the network should now be able to discover ZoneDirector on another
subnet.
Introducing Ruckus Wireless ZoneDirector
Ensuring That APs Can Communicate with ZoneDirector
19