1. Go to Configure > System.
2. Scroll down to Log Settings.
3. Make your selections from these syslog server options:
•
Event Log Level: Select one of the three logging levels: "Show More," "Warning and
Critical Events," or "Critical Events Only."
•
Remote Syslog: To enable syslog logging, select the "Enable reporting to remote syslog
server at" check box, and then type the IP address in the box provided.
4. Click Apply to save your settings. The changes go into effect immediately.
Figure 35.
The Log Settings options
Setting Up Email Alarm Notifications
If an alarm condition is detected, ZoneDirector will record it in the event log. If you prefer, an
email notification can be sent to a configured email address of your choosing.
To activate this option, follow these steps:
1. Go to Configure > Alarm Settings. The Email Notification form appears.
2. To enable email notification, select the Send an email message when an alarm is
triggered check box.
3. Configure the settings listed in
Table
15.
Configuring System Settings
Setting Up Email Alarm Notifications
51