Internal User Database - Ruckus Wireless ZoneDirector 1100 User Manual

Managing User Access
Adding New User Accounts to ZoneDirector
This section describes the procedures for managing users using ZoneDirector's internal user
database. For authentication using an external AAA server, see
User Authentication"

Internal User Database

To use the internal user database as the default authentication source and to create new
user accounts in the database
1. Go to Configure > Users.
2. In the Internal User Database table, click Create New.
3. When the Create New form appears, fill in the text fields with the appropriate entries:
• User Name: Enter a name for this user, up to 32 characters in length, using letters,
numbers and the period (.) character. User names are case-sensitive.
• Full Name: Enter the assigned user's first and last name.
• Password: Enter a unique password for this user, using a combination of letters and
numbers, between 4 and 32 characters in length. Do not incorporate any letter spaces.
Passwords are case-sensitive.
• Confirm Password: Re-enter the same password for this user.
NOTE: ZoneDirector 1100 can support up to 1,250 combined total users and guest passes in
the internal database. ZoneDirector 3000 licensed up to 250 APs can support up to 5,000 total
users and guest passes, while ZoneDirector 3000 licensed from 300 to 500 APs can support up
to 10,000. ZoneDirector 5000 can support up to 1,000 APs and 20,000 users. When the maximum
number of PSKs that ZoneDirector supports has been reached, the Web interface may be slower
in responding to requests.
4. If you have created roles that enable non-standard client logins or that gather staff members
into workgroups, open the Role menu, and then choose the appropriate role for this user.
For more information on roles and their application, see
page
5. Click OK to save your settings. Be sure to communicate the user name and password to
the appropriate end user.
on page 212.
210.
"Using an External Server for
"Creating New User Roles" on
208