Upgrading The License; Upgrading The License With Smart Redundancy - Ruckus Wireless ZoneDirector 1100 User Manual

Setting Administrator Preferences

Upgrading the License

Upgrading the License

Depending on the number of Ruckus Wireless APs you need to manage with your ZoneDirector,
you may need to upgrade your license as your network expands. Contact your authorized
Ruckus Wireless reseller to purchase an upgrade license. Once you load the license via the
Web interface, it takes effect immediately.
Current license information (description, PO number, status, etc.) is displayed on the Web
interface.
NOTE: The system does not reboot or reset after a license is imported.
To import a new license file
1. Go to Administer > License.
2. Click Choose File and select your license file.
3. Once you select your license file and close the Browse window, ZoneDirector immediately
attempts to validate and install the license.
Figure 171. The License page

Upgrading the License with Smart Redundancy

When two ZoneDirectors are deployed in a Smart Redundancy configuration, upgrading the
license on one will cause the Smart Redundancy indicator to display "disconnected" as both
devices need to have the same license number.
To upgrade the licenses on two Smart Redundancy ZoneDirectors
1. On the active ZoneDirector, go to Administer > License and upgrade your license.
2. Repeat for the standby ZoneDirector.
271