Creating A New Access Point Group; Modifying Access Point Group Membership - Ruckus Wireless ZoneDirector 1100 User Manual

Managing Access Points
Working with Access Point Groups
Figure 99.

Creating a New Access Point Group

To create a new AP group with custom settings
1. Go to Configure > Access Points.
2. In the Access Point Groups section, click the Create New button. The Create New form
appears.
3. Enter a Name and optionally a Description for the new AP group.
4. Modify any of the settings in
OK to save your changes.

Modifying Access Point Group Membership

When more than one AP group exists, you can move APs between groups using the Group
Settings section of the Editing [AP Group] form.
To add more access points to this group
1. In Group Settings, click Add more Access Points to this group (or Add more Access
Points from System Default group to this group).
2. Select the APs you want to add, and click Add to this group. The AP is added to the
Members list above.
Editing the System Default access point group settings
Table 24 that you want to apply to the new AP group, and click
158