Creating An Ap Zone - Ruckus Wireless SmartCell Gateway 200 Getting Started Manual

Configuring the SCG for the First Time

Creating an AP Zone

Creating an AP Zone
The first step in configuring the SCG is to create an AP zone. An AP zone functions
as a way of grouping APs and applying a particular set of settings (including WLANs
and their settings) to these groups of APs. Each AP zone can include up to six WLAN
services.
A zone called Staging Zone exists by default. Any AP that registers with the SCG
that is not assigned a specific zone is automatically assigned to the Staging Zone.
NOTE: Certain new features introduced in 3.5 are not compatible with the 3.4 AP
zones.
Follow these steps to create a new AP zone.
1 On the menu, click Access Points.
2 From the System tree, select the location where you want to create the zone (for
example, System or Domain), and then click .
3 Configure the zone by completing the settings listed in Table 12 below.
4 Click OK.
When the controller completes creating the zone, the page refreshes, and then the
zone you created appears in the Access Points tree.
You have completed creating your first AP zone. You can create additional AP zones,
if needed.
57
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.5.1, 800-71517-001 Rev A